Sunday, August 25, 2019

Passenger side dogleg

 Repair work to the right-hand side dogleg was virtually the same as the left-hand side.


 Inside rocker looked much the same as the other side. Just needed to be vacuumed out and re-coated.

 

Rusted section cut out and patched.
 



This side has a skim coat of body filler up and around the fender arch. Not sure what's going on with that, but it may be related to past rear-end collision damage.



 

at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)
  • Dogleg rust repairs
     Cleaned away the rust from the rocker with a wire wheel, and it revealed some rust through. So this would be cut out and patched.   Inner ...
  • Passenger side dogleg
     Repair work to the right-hand side dogleg was virtually the same as the left-hand side.  Inside rocker looked much the same as the other si...
  • LF Wing lower panel replacement : replacement
     Before fitting the new replacement panel, the attachment surfaces on the wing need to be cleaned up and prepared for welding. But there ...