Thursday, May 14, 2020

FR Wing lower panel replacement

 Right side lower wing panel replaced with the new BMH part. Fit was generally very good. I'm glad I changed this out.



The paint on the door was so thick that I had to strip it before I could be sure of the panel alignment. In doing so I discovered that the door is not original. It appears to possibly be a Heritage replacement because of the black epoxy coat I found underneath. But there were at least three paint jobs done on it since it was installed. Yay, a body body panel that didn't need repair! 


at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)
  • Dogleg rust repairs
     Cleaned away the rust from the rocker with a wire wheel, and it revealed some rust through. So this would be cut out and patched.   Inner ...
  • Passenger side dogleg
     Repair work to the right-hand side dogleg was virtually the same as the left-hand side.  Inside rocker looked much the same as the other si...
  • LF Wing lower panel replacement : replacement
     Before fitting the new replacement panel, the attachment surfaces on the wing need to be cleaned up and prepared for welding. But there ...